Tribolt Recumbent Trike

Sunday, November 29, 2015

Couple of pictures from other builders.

3 comments:

UnknownDecember 1, 2015 at 4:50 PM
Good! New posts!
ReplyDelete
Replies
UnknownAugust 9, 2018 at 11:39 AM
Hello there do you Still have the plans for this protject on a file?? if you have then i would be realy happy if you can send them to my E-mail (jarimikk3@gmail.com)
ReplyDelete
Replies
UnknownNovember 9, 2020 at 2:46 PM
Do you still have plans? Please send to me via email
dthi4u@yahoo.com
ReplyDelete
Replies

Add comment

About the Tribolt Recumbent Trike

The Tribolt Recumbent Trike can be built with only a drill, a hacksaw and a file. It's the easiest to build tadpole trike in the world. No welding is required. Anybody with patience and dedication can produce a fully functional trike. Frame and parts can be made from steel, aluminum, wood, whatever you want to use.

The total costs is targeted at the region of $300 US dollars or Euro; depending on frame materials and bike parts. Especially with donor bike components it can stay well under budget.

The project will take about 30 to 40 hours to have a rolling frame with basic finish.
You can always do touch-ups and add accessories or perhaps a full fairing. Every part is easily replaced, and dimensions can be altered... Just un-bolt and re-bolt. It's that easy!

Please do not expect the end result to be as good as a professionally made trike. But by no means it will be a useless piece of junk. If you do your job right the Tribolt is a fully functional trike well capable of distance touring.

We expect you to show us your Tribolt copy and provide information to others about what you did differently and where you found resources.

If you have any questions please comment on this Blog or send mail to

oootrike@gmail.com

Thanks and happy building,

Ron

Tribolt Recumbent Trike

Pagina's

Sunday, November 29, 2015

3 comments:

Blog Archive

About the Tribolt Recumbent Trike